Sitecom WLR-4002B Specifikace stáhnout pdf (Strana 46)

DMZ

If you have a client PC that cannot run an Internet application (e.g. Games)

properly from behind the NAT firewall, then you can open up the firewall

restrictions to unrestricted two-way Internet access by defining a DMZ Host.

The DMZ function allows you to re-direct all packets going to your WAN port

IP address to a particular IP address in your LAN. The difference between the

virtual server and the DMZ function is that the virtual server re-directs a

particular service/Internet application (e.g. FTP, websites) to a particular LAN

client/server, whereas DMZ re-directs all packets (regardless of services)

going to your WAN IP address to a particular LAN client/server.

Enable DMZ Enable/disable DMZ

Public IP Address The IP address of the WAN port or any other Public IP

addresses given to you by your ISP

Client PC IP Address Fill-in the IP address of a particular host in your LAN

that will receive all the packets originally going to the WAN port/Public IP

address above.

Click <Apply> at the bottom of the screen to save the above configurations.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 129 130

Žádné komentáře

Sitecom WLR-4002B Specifikace Strana 46